Hinged Spoon Rest

$0.00

Here is an easy Spoon Rest project with a twist – this Vectric version features a hinged frame that swings up and over the main spoon bowl area to provide a built-in spoon handle support! Swing back over for compact storage. The slight angle of the handle support helps keep drips from your spoons where they belong – in the spoon rest and off your counter top.

The sample was sealed and finished with a food-safe salad bowl finish. A light washing after each use is all that should be required to keep your Spoon Rest in good shape. Mineral Oil can be substituted for the salad bowl finish and re-applied periodically. Either finish you choose should have a minimum of 3 coats applied.

The CLOSED dimensions of the Spoon Rest are about:
4.875″  W  x 5.25″  L  x 1″  T

The OPEN dimensions of the Spoon Rest are about:
4.875″  W  x 8.875″  L  x 1″  T

This free Vectric Project requires Aspire 8.0 or VCarve 8.0 or higher.

Designed by Michael Tyler, carvebuddy.com – January 2016
The sample shown was machined with a ShopBot Buddy PRSalpha BT48 CNC

FREE DOWNLOAD FROM VECTRIC.COM

SKU: Hinged_Spoon_Rest_Vectric_Project Categories: , , , Tags: , , , , , , , ,

Description

Here is an easy Spoon Rest project with a twist – this Vectric version features a hinged frame that swings up and over the main spoon bowl area to provide a built-in spoon handle support! Swing back over for compact storage. The slight angle of the handle support helps keep drips from your spoons where they belong – in the spoon rest and off your counter top.

The sample was sealed and finished with a food-safe salad bowl finish. A light washing after each use is all that should be required to keep your Spoon Rest in good shape. Mineral Oil can be substituted for the salad bowl finish and re-applied periodically. Either finish you choose should have a minimum of 3 coats applied.

The CLOSED dimensions of the Spoon Rest are about:
4.875″  W  x 5.25″  L  x 1″  T

The OPEN dimensions of the Spoon Rest are about:
4.875″  W  x 8.875″  L  x 1″  T

This free Vectric Project requires Aspire 8.0 or VCarve 8.0 or higher.

Designed by Michael Tyler, carvebuddy.com – January 2016
The sample shown was machined with a ShopBot Buddy PRSalpha BT48 CNC

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.